ZNC Push

ZNC Push is a module for ZNC that will send notifications to multiple push notification services for any private message or channel highlight that matches a configurable set of conditions. ZNC Push current supports the following services:

• Boxcar
• Notifo
• Notify My Android (NMA)
• Pushover
• Prowl
• Supertoasty

This project is still a Work In Progress, but should be functional enough and stable enough for everyday usage. Users are more than welcome to submit feature requests or patches for discussion or inclusion. Bug reports and feature requests can be submitted to the repository issues list, or sent via email.

For full functionality, this module requires ZNC version 0.090 or newer, but should compile and run with a reduced feature set on versions as old as 0.078, the current version used by Ubuntu. However, development and testing is done exclusively against the latest source distribution, so feedback on older releases of ZNC is needed to continue supporting them.

ZNC Push was created by John Reese and designed to fill a personal need. It may not fit your use cases, but any and all feedback would be greatly appreciated.

Compiling

If you have installed ZNC from a Linux distribution's repository, you will most likely need to install the development package before building this module. On Ubuntu, this can be installed with:

$ sudo aptitude install znc-dev

If you have make installed, you can compile the module with:

$ make

Otherwise, run the full command:

$ znc-build push.cpp

Installation

Copy the compiled module into your ZNC profile:

$ cp push.so ~/.znc/modules/

Now, load the module in ZNC:

/msg *status loadmod push

Then select the push service you want to use, and set your username and secret as needed. The secret is not your password, and can be obtained by logging into the service's website and looking in your profile or settings:

/msg *push set service notifo
/msg *push set username foo
/msg *push set secret ...

If you're using Boxcar, you need to use the following command to send a subscription request to your account, before ZNC Push can start working:

/msg *push subscribe

At this point, it should start sending notifications every time you get a private message or someone says your name in a channel. If this is everything you wanted, congratulations, you're done!

Migrating From Notifo

Before uninstalling the old Notifo module, save your settings to a file. When you have the new Push module installed, you can then load those settings back in, rather than needing to set your configuration all over again:

/msg *notifo save /tmp/znc_notifo
/msg *push load /tmp/znc_notifo
/msg *push set service notifo

Commands

• help

  Links you to this fine document.

• set <option> <value>

  Allows you to modify configuration values.

• append <option> <value>

  Allows you to add a string to end of a configuration value. Automatically adds a space to separate the appended value from the existing value.

• prepend <option> <value>

  Allows you to add a string to beginning of a configuration value. Automatically adds a space to separate the prepended value from the existing value.

• get [<option>]

  Allows you to see current configuration values.

• unset <option>

  Allows you to reset a configuration option back to the default value.

• save <filename>

  Writes your options to a file with the given path and name.

• load <filename>

  Loads your options from a file with the given path and name. Caution should be taken, as this will lose any options that aren't already saved to the given file.

• status [<context>]

  Check the status of current conditions. Specifying the "context" of either a channel or nick name will provide status values specific to that context.

• subscribe

  Send a subscription request for the selected service to your configured account. This is required by certain services, such as Boxcar, before ZNC Push can send any messages to your account.

• send <message>

  Manually trigger a notification with the given message. Useful for testing to validate credentials, etc.

• eval <expression>

  Evaluate the given expression in an empty context. Useful for testing to validate that a given expression is properly formatted and does not contain invalid tokens.

Configuration

Push Services

• service = ""

  Short name for the push notification service that you want to use. Must be set before ZNC Push can send any notifications.

  Possible values include:

  • "boxcar"
  • "notifo"
  • "nma"
  • "pushover"
  • "prowl"
  • "supertoasty"

• username = ""

  User account that should receive push notifications.

  This option must be set when using Boxcar or Notifo.

• secret = ""

  Authentication token for push notifications.

  This option must be set when using Notifo, Notify My Android, Pushover, Prowl or Supertoasty.

• target = ""

  Device or target name for push notifications.

  When using Pushover, this option allows you to specify a single device name to send notifications to; if blank or unset, notifications will be sent to all devices.

Conditions

• away_only = "no"

  If set to "yes", notifications will only be sent if the user has set their /away status.

  This condition requires version 0.090 of ZNC to operate, and will be disabled when compiled against older versions.

• client_count_less_than = 0

  Notifications will only be sent if the number of connected IRC clients is less than this value. A value of 0 (zero) will disable this condition.

• highlight = ""

  Space-separated list of highlight strings to match against channel messages using case-insensitive, wildcard matching. Strings will be compared in order they appear in the configuration value, and the first string to match will end the search, meaning that earlier strings take priority over later values.

  Individual strings may be prefixed with:

  • - (hypen) to negate the match, which makes the string act as a filter rather than a search

  • _ (underscore) to trigger a "whole-word" match, where it must be surrounded by whitespace to match the value

  • * (asterisk) to match highlight strings that start with any of the above prefixes

  As an example, a highlight value of "-pinto car" will trigger notification on the message "I like cars", but will prevent notifications for "My favorite car is the Pinto" and "I like pinto beans". Conversely, a highlight value of "car -pinto" will trigger notifications for the first two messages, and only prevent notification of the last one.

  As another example, a value of "_car" will trigger notification for the message "my car is awesome", but will not match the message "I like cars".

• idle = 0

  Time in seconds since the last activity by the user on any channel or query window, including joins, parts, messages, and actions. Notifications will only be sent if the elapsed time is greater than this value. A value of 0 (zero) will disable this condition.

• last_active = 180

  Time in seconds since the last message sent by the user on that channel or query window. Notifications will only be sent if the elapsed time is greater than this value. A value of 0 (zero) will disable this condition.

  Note that this condition keeps track of the last message sent to each channel and query window separately, so a recent PM to Joe will not affect a notification sent from channel #foo.

• last_notification = 300

  Time in seconds since the last notification sent from that channel or query window. Notifications will only be sent if the elapsed time is greater than this value. A value of 0 (zero) will disable this condition.

  Note that this condition keeps track of the last notification sent from each channel and query window separately, so a recent PM from Joe will not affect a notification sent from channel #foo.

• nick_blacklist = ""

  Space-separated list of nicks. Applies to both channel mentions and query windows. Notifications will only be sent for messages from nicks that are not present in this list, using a case-insensitive comparison.

  Note that wildcard patterns can be used to match multiple nicks with a single blacklist entry. For example, set nick_blacklist *bot will not send notifications from nicks like "channelbot", "FooBot", or "Robot". Care must be used to not accidentally blacklist legitimate nicks with wildcards.

• replied = "yes"

  If set to "yes", notifications will only be sent if you have replied to the channel or query window more recently than the last time a notification was sent for that context.

Notifications

• message_length = 100

  Maximum length of the notification message to be sent. The message will be nicely truncated and ellipsized at or before this length is reached. A value of 0 (zero) will disable this option.

• message_uri = ""

  URI that will be sent with the notification to Notifo. This could be a web address or a local scheme to access a mobile application. Keyword expansion is performed on this value each time a notification is sent; the following keywords will be replaced with the appropriate value:

  • {context}: the channel or query window context
  • {nick}: the nick that sent the message
  • {datetime}: ISO 8601 date string, in server-local time
  • {unixtime}: unix-style integer timestamp

  As an example, a value of "http://domain/{context}/{datetime}" would be expanded to something similar to "http://domain/#channel/2011-03-09 14:25:09", or "http://domain/{nick}/{unixtime}" to "http://domain/somenick/1299685136".

Advanced

• channel_conditions = "all"

  This option allows customization of the boolean logic used to determine how conditional values are used to filter notifications for channel messages. It evaluates as a full boolean logic expression, including the use of sub-expressions. The default value of "all" will bypass this evaluation and simply require all conditions to be true.

  The expression consists of space-separated tokens in the following grammar:

  • expression = expression operator expression | "(" expression ")" | value
  • operator = "and" | "or"
  • value = "true" | "false" | condition
  • condition =

  As a simple example, to replicate the default "all" value, would be the value of "away_only and client_count_less_than and highlight and idle and last_active and last_notification and nick_blacklist and replied".

  Alternately, setting a value of "true" would send a notification for every message, while a value of "false" would never send a notification.

  For a more complicated example, the value of "client_count_less_than and highlight and (last_active or last_notification or replied) and nick_blacklist" would send a notification if any of the three conditions in the sub-expression are met, while still requiring all of the conditions outside of the parentheses to also be met.

• query_conditions = "all"

  This option is more or less identical to channel_conditions, except that it is used to filter notifications for private messages.

• debug = "off"

  When set to "on", this option enables debug output for various features, and is useful in troubleshooting problems like failed push notifications. Debug output will show up in your *push window.

License

This project is licensed under the MIT license. See the LICENSE file for details.