Updated transitive dependencies

go.mod

@@ -5,7 +5,7 @@ go 1.22
 require (
 	github.com/alecthomas/chroma/v2 v2.13.0
 	github.com/julienschmidt/httprouter v1.3.0
-	github.com/klauspost/compress v1.17.7
+	github.com/klauspost/compress v1.17.8
 	github.com/spf13/cobra v1.8.0
 	github.com/yosssi/gohtml v0.0.0-20201013000340-ee4748c638f4
 	golang.org/x/image v0.15.0
@@ -15,5 +15,5 @@ require (
 	github.com/dlclark/regexp2 v1.11.0 // indirect
 	github.com/inconshreveable/mousetrap v1.1.0 // indirect
 	github.com/spf13/pflag v1.0.5 // indirect
-	golang.org/x/net v0.22.0 // indirect
+	golang.org/x/net v0.24.0 // indirect
 )

go.sum

@@ -13,8 +13,8 @@ github.com/inconshreveable/mousetrap v1.1.0 h1:wN+x4NVGpMsO7ErUn/mUI3vEoE6Jt13X2
 github.com/inconshreveable/mousetrap v1.1.0/go.mod h1:vpF70FUmC8bwa3OWnCshd2FqLfsEA9PFc4w1p2J65bw=
 github.com/julienschmidt/httprouter v1.3.0 h1:U0609e9tgbseu3rBINet9P48AI/D3oJs4dN7jwJOQ1U=
 github.com/julienschmidt/httprouter v1.3.0/go.mod h1:JR6WtHb+2LUe8TCKY3cZOxFyyO8IZAc4RVcycCCAKdM=
-github.com/klauspost/compress v1.17.7 h1:ehO88t2UGzQK66LMdE8tibEd1ErmzZjNEqWkjLAKQQg=
+github.com/klauspost/compress v1.17.8 h1:YcnTYrq7MikUT7k0Yb5eceMmALQPYBW/Xltxn0NAMnU=
-github.com/klauspost/compress v1.17.7/go.mod h1:Di0epgTjJY877eYKx5yC51cX2A2Vl2ibi7bDH9ttBbw=
+github.com/klauspost/compress v1.17.8/go.mod h1:Di0epgTjJY877eYKx5yC51cX2A2Vl2ibi7bDH9ttBbw=
 github.com/russross/blackfriday/v2 v2.1.0/go.mod h1:+Rmxgy9KzJVeS9/2gXHxylqXiyQDYRxCVz55jmeOWTM=
 github.com/spf13/cobra v1.8.0 h1:7aJaZx1B85qltLMc546zn58BxxfZdR/W22ej9CFoEf0=
 github.com/spf13/cobra v1.8.0/go.mod h1:WXLWApfZ71AjXPya3WOlMsY9yMs7YeiHhFVlvLyhcho=
@@ -24,7 +24,7 @@ github.com/yosssi/gohtml v0.0.0-20201013000340-ee4748c638f4 h1:0sw0nJM544SpsihWx
 github.com/yosssi/gohtml v0.0.0-20201013000340-ee4748c638f4/go.mod h1:+ccdNT0xMY1dtc5XBxumbYfOUhmduiGudqaDgD2rVRE=
 golang.org/x/image v0.15.0 h1:kOELfmgrmJlw4Cdb7g/QGuB3CvDrXbqEIww/pNtNBm8=
 golang.org/x/image v0.15.0/go.mod h1:HUYqC05R2ZcZ3ejNQsIHQDQiwWM4JBqmm6MKANTp4LE=
-golang.org/x/net v0.22.0 h1:9sGLhx7iRIHEiX0oAJ3MRZMUCElJgy7Br1nO+AMN3Tc=
+golang.org/x/net v0.24.0 h1:1PcaxkF854Fu3+lvBIx5SYn9wRlBzzcnHZSiaFFAb0w=
-golang.org/x/net v0.22.0/go.mod h1:JKghWKKOSdJwpW2GEx0Ja7fmaKnMsbu+MWVZTokSYmg=
+golang.org/x/net v0.24.0/go.mod h1:2Q7sJY5mzlzWjKtYUEXSlBWCdyaioyXzRB2RtU8KVE8=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
 gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=

vendor/github.com/klauspost/compress/README.md

@@ -56,6 +56,10 @@ https://github.com/klauspost/compress/pull/919 https://github.com/klauspost/comp
 	* flate: Add amd64 assembly matchlen https://github.com/klauspost/compress/pull/837
 	* gzip: Copy bufio.Reader on Reset by @thatguystone in https://github.com/klauspost/compress/pull/860
 
+<details>
+	<summary>See changes to v1.16.x</summary>
+
+   
 * July 1st, 2023 - [v1.16.7](https://github.com/klauspost/compress/releases/tag/v1.16.7)
 	* zstd: Fix default level first dictionary encode https://github.com/klauspost/compress/pull/829
 	* s2: add GetBufferCapacity() method by @GiedriusS in https://github.com/klauspost/compress/pull/832
@@ -93,6 +97,7 @@ https://github.com/klauspost/compress/pull/919 https://github.com/klauspost/comp
 	* s2: Add LZ4 block converter. https://github.com/klauspost/compress/pull/748
 	* s2: Support io.ReaderAt in ReadSeeker. https://github.com/klauspost/compress/pull/747
 	* s2c/s2sx: Use concurrent decoding. https://github.com/klauspost/compress/pull/746
+</details>
 
 <details>
 	<summary>See changes to v1.15.x</summary>
@@ -560,6 +565,8 @@ the stateless compress described below.
 
 For compression performance, see: [this spreadsheet](https://docs.google.com/spreadsheets/d/1nuNE2nPfuINCZJRMt6wFWhKpToF95I47XjSsc-1rbPQ/edit?usp=sharing).
 
+To disable all assembly add `-tags=noasm`. This works across all packages.
+
 # Stateless compression
 
 This package offers stateless compression as a special option for gzip/deflate. 

vendor/github.com/klauspost/compress/internal/snapref/encode_other.go

@@ -51,7 +51,7 @@ func emitCopy(dst []byte, offset, length int) int {
 	i := 0
 	// The maximum length for a single tagCopy1 or tagCopy2 op is 64 bytes. The
 	// threshold for this loop is a little higher (at 68 = 64 + 4), and the
-	// length emitted down below is is a little lower (at 60 = 64 - 4), because
+	// length emitted down below is a little lower (at 60 = 64 - 4), because
 	// it's shorter to encode a length 67 copy as a length 60 tagCopy2 followed
 	// by a length 7 tagCopy1 (which encodes as 3+2 bytes) than to encode it as
 	// a length 64 tagCopy2 followed by a length 3 tagCopy2 (which encodes as

vendor/github.com/klauspost/compress/zstd/blockdec.go

@@ -554,6 +554,9 @@ func (b *blockDec) prepareSequences(in []byte, hist *history) (err error) {
 		if debugDecoder {
 			printf("Compression modes: 0b%b", compMode)
 		}
+		if compMode&3 != 0 {
+			return errors.New("corrupt block: reserved bits not zero")
+		}
 		for i := uint(0); i < 3; i++ {
 			mode := seqCompMode((compMode >> (6 - i*2)) & 3)
 			if debugDecoder {

vendor/github.com/klauspost/compress/zstd/blockenc.go

@@ -427,6 +427,16 @@ func (b *blockEnc) encodeLits(lits []byte, raw bool) error {
 	return nil
 }
 
+// encodeRLE will encode an RLE block.
+func (b *blockEnc) encodeRLE(val byte, length uint32) {
+	var bh blockHeader
+	bh.setLast(b.last)
+	bh.setSize(length)
+	bh.setType(blockTypeRLE)
+	b.output = bh.appendTo(b.output)
+	b.output = append(b.output, val)
+}
+
 // fuzzFseEncoder can be used to fuzz the FSE encoder.
 func fuzzFseEncoder(data []byte) int {
 	if len(data) > maxSequences || len(data) < 2 {
@@ -479,6 +489,16 @@ func (b *blockEnc) encode(org []byte, raw, rawAllLits bool) error {
 	if len(b.sequences) == 0 {
 		return b.encodeLits(b.literals, rawAllLits)
 	}
+	if len(b.sequences) == 1 && len(org) > 0 && len(b.literals) <= 1 {
+		// Check common RLE cases.
+		seq := b.sequences[0]
+		if seq.litLen == uint32(len(b.literals)) && seq.offset-3 == 1 {
+			// Offset == 1 and 0 or 1 literals.
+			b.encodeRLE(org[0], b.sequences[0].matchLen+zstdMinMatch+seq.litLen)
+			return nil
+		}
+	}
+
 	// We want some difference to at least account for the headers.
 	saved := b.size - len(b.literals) - (b.size >> 6)
 	if saved < 16 {

vendor/github.com/klauspost/compress/zstd/decoder.go

@@ -82,7 +82,7 @@ var (
 // can run multiple concurrent stateless decodes. It is even possible to
 // use stateless decodes while a stream is being decoded.
 //
-// The Reset function can be used to initiate a new stream, which is will considerably
+// The Reset function can be used to initiate a new stream, which will considerably
 // reduce the allocations normally caused by NewReader.
 func NewReader(r io.Reader, opts ...DOption) (*Decoder, error) {
 	initPredefined()

vendor/github.com/klauspost/compress/zstd/enc_best.go

@@ -135,8 +135,20 @@ func (e *bestFastEncoder) Encode(blk *blockEnc, src []byte) {
 		break
 	}
 
+	// Add block to history
 	s := e.addBlock(src)
 	blk.size = len(src)
+
+	// Check RLE first
+	if len(src) > zstdMinMatch {
+		ml := matchLen(src[1:], src)
+		if ml == len(src)-1 {
+			blk.literals = append(blk.literals, src[0])
+			blk.sequences = append(blk.sequences, seq{litLen: 1, matchLen: uint32(len(src)-1) - zstdMinMatch, offset: 1 + 3})
+			return
+		}
+	}
+
 	if len(src) < minNonLiteralBlockSize {
 		blk.extraLits = len(src)
 		blk.literals = blk.literals[:len(src)]

vendor/github.com/klauspost/compress/zstd/enc_better.go

@@ -102,9 +102,20 @@ func (e *betterFastEncoder) Encode(blk *blockEnc, src []byte) {
 		e.cur = e.maxMatchOff
 		break
 	}
-
+	// Add block to history
 	s := e.addBlock(src)
 	blk.size = len(src)
+
+	// Check RLE first
+	if len(src) > zstdMinMatch {
+		ml := matchLen(src[1:], src)
+		if ml == len(src)-1 {
+			blk.literals = append(blk.literals, src[0])
+			blk.sequences = append(blk.sequences, seq{litLen: 1, matchLen: uint32(len(src)-1) - zstdMinMatch, offset: 1 + 3})
+			return
+		}
+	}
+
 	if len(src) < minNonLiteralBlockSize {
 		blk.extraLits = len(src)
 		blk.literals = blk.literals[:len(src)]

vendor/modules.txt

@@ -14,7 +14,7 @@ github.com/inconshreveable/mousetrap
 # github.com/julienschmidt/httprouter v1.3.0
 ## explicit; go 1.7
 github.com/julienschmidt/httprouter
-# github.com/klauspost/compress v1.17.7
+# github.com/klauspost/compress v1.17.8
 ## explicit; go 1.20
 github.com/klauspost/compress
 github.com/klauspost/compress/fse
@@ -39,7 +39,7 @@ golang.org/x/image/riff
 golang.org/x/image/vp8
 golang.org/x/image/vp8l
 golang.org/x/image/webp
-# golang.org/x/net v0.22.0
+# golang.org/x/net v0.24.0
 ## explicit; go 1.18
 golang.org/x/net/html
 golang.org/x/net/html/atom